Primrose Sands is in Sorell LGA, TAS, postcode 7173, with population 1,209.
The page is still useful for local context, but the evidence stack is too thin for a clean one-page call. Use nearby stronger suburbs or compare mode before treating it as a serious shortlist decision.
The page is thin enough that nearby alternatives should be checked before shortlisting.
Price series isn't recorded for this suburb. Census housing data is shown instead.
Indicative cashflow is interest-only and excludes tax — use the calculator for a full projection. Turnover divides recorded sales by an estimated household count (population over average household size).
77% of homes here are owner-occupied and 17% rented, with 5% of landlords negatively geared.
77% owner-occupied — owner-occupiers hold longer and absorb rate shocks, supporting price stability.
ABS Census 2021 tenure (G37), ATO postcode rental statistics, and QuickProperty's investor-exposure index. Owner-occupied = owned outright + with a mortgage.
This suburb 49% · TAS median 20%
Nationally · lighter rent burden than 1% of AU suburbs
Owners with a mortgage repay a median of $1,062/mo, while renters pay about $1,950/mo — renting runs $888/mo higher on these medians.
At the median asking rent, about 72% of households here would spend more than 30% of income on rent (rent stress line: $1,500/wk income).
Getting to work: 84% drive, 0% public transport, 1% walk or cycle, 10% worked from home (2021 Census, taken during COVID-era work-from-home arrangements).
Development screen
A specific stable official policy source has not yet been adopted for this jurisdiction. Confirm the current planning scheme and building approval path directly with the local authority before relying on this screen.
Rental use: Review TAS planning, building and tenancy requirements before use.
Open official policy sourceSuburb share of occupied private dwellings recorded as separate houses.
28.9 pp below the state median
State median 83.6% · 129 valid suburbs
A comparable planning-zone layer is not staged for this state.
Demand context only; it does not establish permission to rent a secondary dwelling.
8.6 pp below the state median
State median 25.7% · 129 valid suburbs
No broad-area layer staged for this suburb. No broad-area layer staged for this suburb.
Approval pathway
This is an investigation sequence, not a guarantee that every step applies or that approval will be granted.
The current ancillary dwelling / secondary residence position needs direct confirmation before relying on this screen.
Confirm zoning, lot controls, overlays, setbacks, site coverage and whether planning approval is required.
Confirm the building approval route after the design, site classifications, services and construction requirements are known.
Confirm long-term rental, short-stay or family-use rules separately from permission to construct the dwelling.
Property due diligence
Every check starts unconfirmed. Progress stays in this browser and suburb evidence never clears an address-level requirement.
Confirm title dimensions, usable site area and any minimum lot threshold.
Metadata only. QuickProperty does not store or upload the underlying document.
Test setbacks, private open space, landscaping and maximum site coverage against a concept plan.
Metadata only. QuickProperty does not store or upload the underlying document.
Check survey levels, soil classification, retaining needs and likely earthworks.
Metadata only. QuickProperty does not store or upload the underlying document.
Obtain current property-level zoning, overlays and applicable planning controls.
Metadata only. QuickProperty does not store or upload the underlying document.
Review the title for easements, covenants, restrictions and common property.
Metadata only. QuickProperty does not store or upload the underlying document.
Locate assets and connection points, then confirm capacity, clearances and discharge requirements.
Metadata only. QuickProperty does not store or upload the underlying document.
Confirm service routes, upgrade needs and whether separate metering is permitted or practical.
Metadata only. QuickProperty does not store or upload the underlying document.
Test driveway width, gradients, turning, parking and emergency access requirements.
Metadata only. QuickProperty does not store or upload the underlying document.
Order an address-level bushfire assessment and determine any BAL construction response.
Metadata only. QuickProperty does not store or upload the underlying document.
Obtain property flood information and check floor levels, flow paths and drainage constraints.
Metadata only. QuickProperty does not store or upload the underlying document.
Confirm site classifications that affect structural design, materials and durability.
Metadata only. QuickProperty does not store or upload the underlying document.
Confirm exemption, complying pathway or permit requirements with the responsible authority.
Metadata only. QuickProperty does not store or upload the underlying document.
Identify required survey, design, engineering, energy, certification and inspection evidence.
Metadata only. QuickProperty does not store or upload the underlying document.
Confirm occupation, rental, short-stay and family-use rules plus insurance and tax implications.
Metadata only. QuickProperty does not store or upload the underlying document.
Building due diligence
The National Construction Code is the baseline. Local hazards and site classifications can change the required structure, materials, fixings, insulation and detailing.
No local compliance layer is staged.
This is missing evidence, not evidence that the property has no constraints.
Confirm the NCC climate zone used for the building design and energy provisions.
May affect: Insulation and glazing · Condensation control · Roof-space ventilation
A suburb layer cannot determine the site wind classification or Bushfire Attack Level.
May affect: Structure and tie-downs · Cladding and fixings · Openings and bushfire detailing
Confirm marine or corrosive exposure and the applicable termite-management requirements.
May affect: Fasteners and connectors · Roofing and coatings · Termite management
This screen identifies investigation triggers, not building quality or property compliance. Confirm the address, design and current jurisdiction rules with the council, building surveyor or certifier, designer and engineer.
NCC 2022 Housing Provisions: how to use · NCC 2022 Volume Two and Housing Provisions
Estimated short-let income is 0.6× the $23,400/yr a long-term let would earn at the median rent — before management fees, cleaning, vacancy beyond the occupancy model, and short-stay regulation.
Active Airbnb listings point-mapped to this suburb from Inside Airbnb (CC BY 4.0). Occupancy and revenue are estimates from Inside Airbnb's San Francisco model (review-rate proxy, minimum-stay assumption, occupancy capped at 70%) — they are gross, indicative, and not a guarantee of returns. Short-stay letting is subject to state and local regulation.
ABS population projection (2022 base) for the Dodges Ferry - Lewisham SA2 statistical area — the finest official projection grain available; suburb-level projections do not exist.
Primrose Sands (postcode 7173) is a small community in Tasmania within the Sorell local government area. With a population of 1,209, the suburb has a mature demographic with a median age of 54. Households earn a median income of $48K per year, with an average household size of 1.9 people. Recent annual estimates show population movement staying broadly stable across the broader catchment, with population growth running at +1.4% year-on-year at the LGA level. TAS employment has moved -1.7% year-on-year in the official ABS Labour Force trend series, which provides the broader jobs backdrop for this suburb. TAS also had 17 Commonwealth-backed major projects under construction, 2 underway, and 16 in planning as at 2025-09-01, which is useful as a broader delivery backdrop rather than a suburb-specific project count. The most common occupations are technicians & trades, professionals, community & personal service. Employment in the area leans toward healthcare and retail trade. The top ancestries reported are English, Australian, Scottish.
The current median weekly rent is $450. The median monthly mortgage repayment is $1,062.
On the investment side, Population growth of +1.4% year-on-year points to stable demand fundamentals. Building approvals have changed +0% year-on-year, indicating steady development activity.
Save suburbs here while you browse. Once the shortlist has two or more names, hand it straight into compare.
No saved AU suburbs yet.
No saved suburbs yet. Start with one ranking or suburb page, then compare once you have two candidates.
Open rankings to save the first candidates.
Primrose Sands is usable as a read, though it still needs cross-checking.
QuickProperty mixes release files, Census baselines, and matched local services on this page. Read the status panel before treating every metric as equally fresh.
Official annual SA2 price series matched to suburb pages as fallback coverage
Use current rent as a starting signal, not as a fixed underwriting truth.
Schools, transport, and hospitals are useful as presence signals, but they still have different source cadences.
This page stays indexable because Primrose Sands is a real locality with enough context to be directionally useful. The tradeoff is that coverage is lighter than a stronger suburb profile, so the read should stay cautious.
Use it for direction first, then confirm the story against stronger neighbouring suburbs or the state hub before relying on it.
Coverage is thinner on school matches, hospital coverage, transport stops, and crime coverage; lean less on this one page and confirm those gaps elsewhere.
Start here for context, then open compare, the state hub, or larger nearby suburbs before treating this as a complete market decision.
This page remains visible, but it should be read as a locality brief rather than a full-confidence suburb profile.
Use this page to set direction, not to close a decision — frame the locality here, then confirm with compare, stronger nearby suburbs, and the state hub.
If Primrose Sands feels too thin on its own, use these nearby suburbs as stronger local reads before making a shortlist decision.
pop -100 · rent -$155/wk
Similar local read: useful for context, but still compare the actual market signals.
pop +200 · rent -$100/wk
Similar local read: useful for context, but still compare the actual market signals.
Primrose Sands is in the Sorell Local Government Area, TAS, postcode 7173. Council-level context for Sorell LGA (suburb mix, population, rent, and price coverage) is available on the QuickProperty LGA page.
The median weekly rent in Primrose Sands is $450/wk, based on the current market rent dataset. The current rent signal is rent context available.
Rent context available: Primrose Sands has usable rent context. Use this as a suburb screening signal before comparing candidates or modelling a purchase; the matching rent ranking can provide broader market context.
QuickProperty's investment signals for Primrose Sands show: Stable, Steady. These are computed from price, rent, income, and population data — not an opaque score.
Property prices come from state Valuers General offices and ABS Data by Region. Demographics are from ABS Census 2021. School ICSEA scores are from ACARA. Crime statistics are from state police agencies. Transport data is sourced from GTFS feeds.
Property prices update quarterly. RBA macro indicators update with each deploy. Demographics are from Census 2021. School ICSEA scores are from ACARA 2025.